ANY ROOM – ANY CEILING – ANY HEIGHT
The halo family of tube supports provides flexibility to facilitate a wide range of x-ray procedures. Fully counterbalanced, these heavy-duty systems can be easily positioned at any selected point within their total range of travel. The x-ray tube rotates a full 360-degrees about their vertical and horizontal axis with mechanical indexing at each 90-degree position (each 15 degrees column detents). The ergonomic operator control panels provide convenient selections to allow the tube to be moved in the longitudinal, transversal, vertical and rotational directions, and allows for table/wall Bucky centering. Single handle controls allow for fast and out of the way positioning. Clean, carefully laid out cable management. The LCD displays indicate SID to tabletop/wall Bucky in inches or centimeters (calibrated at installation) and angulation of x-ray tube in degrees. The “Intelligent Firmware” allows for fast and easy access to calibration and configuration. Platform mounts are standard, and 10” orthopedic column extensions are optional. Isolated on-board 24VAC & 24VDC Power for Collimator etc… Durable powder coat finish.
CURRENT MODELS:
- halo Compact
- halo Extended
- halo Touchscreen
- halo Ortho
- halo Everywhere
- halo 2500/2517
- halo Trauma
- halo Outboard
- halo Front/Rear
- halo Spread
- halo Tracking
- halo Stitching
Hospital Grade Overhead Tube System
- Twelve Different halo Overhead Tube Support Models
- Hospital-grade
- Manually operated
- Fully Counterbalanced Ceiling-mounted Unit
- Adaptable to ceiling heights between 96” – 132”
- New SID Tracking Systems featuring 20X life
- 10X Life Counterpoises
- Five-Million Cycle-life Mil-Spec Interface Switches
- Models available for unique imaging and/or unique installation applications.
Touchscreen Operation available
HaloRad 8.5’ Ceiling
HaloRad 9.5’ Ceiling
Sample Specification (Model No: 02-000-2517)
Longitudinal Rail Length: | Standard – 14’ (4.27m) *Optional – 12’, 16’, 18’ |
Transverse Bridge Length: | Standard – 120’’ (3.03m) |
Vertical Travel: | Standard – 60” (1,524 mm) |
Total weight of standard unit: | 400 lbs. (181 Kg) |
Component Weights | |
---|---|
Transverse Bridge: | 109 lbs. (49.0 Kg) |
Telescope Carriage: | 214 lbs. (96.3 Kg) |
Long Rails (2): | 14’-70 lbs. (31.6 Kg) 12’-60.2 lbs. (27.1 Kg) 16’-80.3 lbs. (36.1 Kg) 18’-90.4 lbs. (40.7 Kg) |
Electrical Requirements: | 115/220 VAC, 50/60 Hz, 5 – Amps |